Insight Optometry

Types of Contacts

Confused about contacts?
Advances in contact lens technologies have created many options in addition to hard and soft lenses. Today, contact lenses are likely to be described in one or several of the following ways.

By their prescribed wearing period:
The time that the lenses are left in the eyes.
Daily Wear (Up to 18 hours)
Extended Wear (For overnight use, up to seven days)

By their replacement schedule:
The time interval for replacing lenses.
Planned - (Frequent replacement: 1 month, 1-2 weeks; daily disposable)
Unplanned, or Conventional Replacement - (No specific time schedule before lenses are replaced)

By the type of vision correction for which they are designed:
Spherical (For near- or farsightedness -- myopia or hypermetropia)
Toric (For astigmatism)
Bifocals (For presbyopia)

By the type of tint they have:
Tinted to improve handling only
Tinted to enhance your eye color (For light-color eyes)
Tinted to change your eye color (Opaque tints for light or dark eyes)
Clear - without tints

Of course, contact lenses are also still described by the basic type of material of which they are made:
Soft (hydrophilic) hydrogels
Soft silicone hydrogels
Rigid Gas Permeable

By wearing period:

Daily Wear: Lenses prescribed for daily wear are to be worn only during waking hours, usually up to a maximum of 18 hours. Daily wear lenses are removed at night and cleaned and disinfected after each removal.
Extended Wear: Extended wear lenses may be worn on an overnight basis for up to seven consecutive days (six nights). You should wear your lenses on an extended wear basis only on the advice of your optometrist. Extended wear lenses generally have a higher water content or thinner center thickness than other lenses and permit more oxygen to reach the eye. However, their use has been linked to a higher incidence of eye problems. Extended wear lenses need to be cleaned and disinfected at recommended intervals or discarded after use.

By Replacement Period:
Contact lens are often prescribed with a specific replacement schedule suitable to your specific needs. Planned (or Frequent) Replacement contacts are disposed of and replaced with a new pair according to a planned schedule. Unplanned replacement lenses (often called conventional lenses) are not replaced according to a pre-determined schedule. They are typically used for as long as they remain undamaged, usually around 12 months for soft lenses.

Why replace lenses frequently?
Almost immediately after they are inserted, contact lenses begin attracting deposits of proteins and lipids. Accumulated deposits, even with routine lens care, begin to erode the performance of your contacts and create a situation that presents a greater risk to your eye health.

A specific replacement schedule helps to prevent problems before they might occur. Contact lens wearers, in turn, enjoy the added comfort, convenience and health benefits of a planned replacement program. Planned replacement lenses are generally a thinner design or are made of different, more fragile materials with a higher water content than unplanned replacement or conventional contact lenses.

Based on a complete assessment of your needs, a prescription for planned replacement lenses may call for replacement:

Quarterly
Monthly
Every 1-2 weeks
Daily

Except for daily disposables, planned replacement lenses require cleaning and disinfection after each period of wear unless they are discarded immediately upon removal. Planned replacement lenses can be worn as daily wear - removed before sleep - or as extended wear, if recommended by your practitioner.

By Type of Vision Correction Required:
Contact lenses may be identified by the type of refractive error they are designed to correct.

Spherical contact lenses for nearsightedness (myopia) and farsightedness (hypermetropia); Toric contact lenses for astigmatism; Bifocal lenses for presbyopia, the loss of ability to focus on reading or close-up activities.

As an alternative to special bifocal contact lenses, many practitioners use a system called monovision where one eye is fitted with a distance lens and the other with a reading lens. Approximately two-thirds of patients adapt to this type of contact lens wear.

By Type of Tint:
Contact lenses may be described as clear or tinted. Tints are used to make lenses more visible during handling, or for therapeutic or cosmetic reasons. Tints can enhance eye color, or change it altogether.

Three categories of tinted contact lenses are available:

Cosmetic enhancement tints are translucent and are designed to enhance your natural eye color. They are best for light-colored eyes (blues, greens, light hazel or grays). When wearing these tints, the color of your eye is a blend of the lens tint and your natural eye color and iris pattern.
Opaque or "cosmetic" tints change the color of your eyes whether they are dark or light. The pattern on the lens, which is colored, overlies the colored part of your eye, resulting in a color with a natural look.
Visibility tints are very pale, colored just enough to make the contact lens visible while you are handling it. They usually have no effect on eye color.

Learning Center

CATEGORIES

Types of Contacts